Filter
Top Products
36
About the Pads
■ Recommended Parameters for the Pads
The trigger parameters (except the Xtalk Cancel) are automatically set to the most efficient
values for each pad when you select the trigger type.
You may need to adjust the value since these are just the reference value. Make settings for
the parameters as needed (Basic Trigger Parameters: p. 72; Advanced Trigger Parameters:
p. 74).
fig.P-024b.e
The “Xtalk Cancel (Crosstalk Cancel)” value does not change when the trigger type is
changed. It should be adjusted as necessary to match the actual state of your configuration
and the environment in which it is being used (SETUP/TRIG BASIC/Xtalk Cancel; p. 74).
• For details about “Other 1” and “Other 2,” refer to p. 72.
• Use the “AcDrTrig” setting when you use acoustic drums to sound the TD-6. For details
refer to “Using the TD-6 with Acoustic Triggers” (p. 76).
Kick Trigger Unit
KD-7
KD-5
KD-80
KD-120
PD-5
PD-6
PD-7
PD-9
PD-80
PD-80R
PD-100
PD-120
CY-6
CY-12H
CY-14C
CY-15R
TrigTypPad
KD7
KD7
KD Type
KD Type
PD7/9
PD6
PD7/9
PD7/9
PD80/100
PD80R
PD80/100
PD120
CY6
CY Type
CY Type
CY Type
PadCymbal
Basic Trigger Parameters Advanced Trigger Parameters
Sensitivity Threshold TrigCurve
Xtalk Cancel
Scan Time
Retrig Cancel
Mask Time Rim Sens
85LINEAR 20 2.0 5 8
85LINEAR 20 2.0 5 8
10 4 LINEAR 20 2.0 5 4
10 4 LINEAR 20 2.0 5 4
83LINEAR 40 0.5 3 4
73LINEAR 40 1.0 3 4
83LINEAR 40 0.5 3 4
83LINEAR 40 0.5 3 4
83LINEAR 40 1.0 3 4
81LINEAR 40 1.0 3 4 11
83LINEAR 40 1.0 3 4
91LINEAR 20 1.6 3 4 7
10 3 LINEAR 30 2.0 3 8
10 3 LINEAR 30 0.5 3 8
10 3 LINEAR 30 0.5 3 8
10 3 LINEAR 30 0.5 3 8
Other 1
Other 2
AcDrTrig
83LINEAR 40 1.5 3 4
83LINEAR 40 3.0 3 8
12 5 LINEAR 40 3.0 3 12
Others