Filter
Top Products
80
Chapter 4 Setting the Metronome
(Click Edit)
Parameters That Can Be Set Here
fig.04-001.e
Switching the Click On/Off (Click)
You can switch the click sound on and off by pressing [CLICK].
[CLICK] lights while the click sound is set to be played.
fig.04-002.e
Click cannot be used in GM mode (p. 100).
Tempo Adjustment (Tempo)
For each song selected, the tempo of the click changes to the
tempo specified for that song.
1. Press [CLICK].
[CLICK] lights, and the click sound begins to play.
2. While holding down [SHIFT], press [CLICK
(TEMPO)].
The “TEMPO” screen appears.
fig.04-003_50
3. Press [INC/+] or [DEC/-] to select the tempo.
4. When you finish making settings, press [EXIT]
to end the procedure.
The “TEMPO” screen disappears.
fig.04-004_50
TEMPO: 20–260
Setting the Way the Click
Sounds
Settings that determine how the click sounds, volume, time
signature etc.
1. Confirm that [EDIT] is not lit.
If this lights, press [KIT] or [SONG] to extinguish it.
2. Press [CLICK].
[CLICK] lights, and the click sound begins to play.
3. Press [EDIT].
4. Press [ ] or [ ] to select the parameter you
wish to edit.
fig.04-005ai.e
5. Press [INC/+] or [DEC/-] to make the setting.
fig.04-006ai.e
6. When you finish making settings, press [KIT] or
[SONG] to end the procedure.
Volume Adjustment (Click Level)
Adjusts the volume of the click sound. Raising the value will
increase the volume. With a setting of “0,” no sound is
produced.
fig.04-007_50
Click Level: 0–127
CLICK (Click Settings) (p. 80)
Click Level
Interval
Inst
Pan
Play Count In
Rec Count In
Time Signature
Click is played Click is not played
Lit Unlit
Parameter to set
Value