Roland TD-6 Musical Instrument User Manual


 
79
Chapter 3 Global Settings for the TD-6 (SETUP/UTILITY, Factory Reset)
3
Preview Volume Control
(Preview Velocity)
This sets the velocity used when an instrument is previewed.
Raising the value will increase the volume. With a setting of
“0,” no sound is produced.
fig.03-008_50
Preview Velocity: 0–127
Checking the Remaining Amount of
Memory (Available Memory)
You can check the amount of available memory.
fig.03-009_50
AvailMemory (Available Memory): 0–100%
Restoring the Factory Settings
(Factory Reset)
This restores the pad and instrument settings, song data, and
other information stored in the TD-6 to the original factory
settings.
All data and settings stored in the TD-6 are lost in carrying out
this operation. Use the “Bulk Dump” operation to save crucial
data and settings to an external MIDI device (SETUP/BULK
DUMP/Bulk Dump; p. 103).
When [SHIFT] and [EDIT (SETUP)] are held down when the
power is turned on, the display jumps to the Factory Reset
screen. When carrying out Factory Reset, read from step 4.
1. While holding down [SHIFT], press [EDIT
(SETUP)].
[EDIT (SETUP)] lights.
2. Press [ ] to select “FactoryReset”
fig.P-005_50
3. Press [ENTER ].
The Factory Reset screen appears.
4. Press [INC/+] or [DEC/-] to select the parameter
you want to restore to factory settings.
fig.P-006_50
5. Press [ENTER ].
Press [EXIT] to cancel the operation.
The confirmation screen appears.
fig.P-007_50
6. If you’re ready to proceed, press [ENTER ],
and the Factory Reset operation will be
executed.
7. When the Factory Reset is finished, the
Completed screen appears.
fig.P-008_50
Reset (Factory Reset):
ALL, THIS DRUM KIT, ALL DRUM KITS,
ALL SONGS
ALL:
All internal settings will be restored to the factory settings.
THIS DRUM KIT:
Only the settings for the currently selected drum kit are
restored to the factory settings.
ALL DRUM KITS:
The settings for all of the TD-6’s internal drum kits are
restored to the
factory settings.
ALL SONGS:
All of the TD-6’s internal song data is restored to the factory
settings.
Value