Filter
Top Products
14 TASCAM 2488neo
2 − Setting up and basic knowledge
2 Turn the JOG/DATA dial until the DISK item is
highlighted, and then press the YES/ENTER key.
The DISK menu appears.
3 Use the JOG/DATA dial until the SELECT item is
highlighted, and then press the YES/ENTER key.
The partition list appears on the screen. The open
space in each partition appears on the right.
4 Use the
JOG/DATA
dial until the partition you wish to
use is highlighted, and then press the
YES/ENTER
key.
The partition is now selected.
Songs
When using the 2488neo, the term “song” refers to all the
data related to the recording, playback, editing, and other
work in a single project. Each song includes recorded audio
data, and a “playlist” (playback procedures for audio data),
track and mark point information, and settings for the
mixer, effects, MIDI, tempo and pitch control. This infor-
mation is never shared between different songs.
Each partition can contain a maximum of 250 songs, and
each song can be given a name.
You must select a song by creating a new song, or loading an
existing song before you can do any work with the 2488neo.
Save the song when you finish working. See “First steps in
recording (song management)” on page 44 for more details.
NOTE
When you change the active partition (see "Selecting
the active partition" on page 13) the most recently
used song in the newly active partition is loaded.
Screen
ª
Menu screen
You make many of the settings for this unit from the menu
screen. With the transport stopped, press the MENU key to
display the MENU screen. Use the cursor keys or the JOG/
DATA dial to select the desired menu, and then press the
YES/ENTER key.
NOTE
Some keys, including the transport keys, do not func-
tion when the MENU screen is shown.
ª
Home screen
This screen shows the main information related to record-
ing. Press the HOME key to display the home screen, which
shows track levels, current song position, song name,
remaining recordable time (minutes) and other information.