Filter
Top Products
96 TASCAM 2488neo
12 − Tempo and MIDI
MIDI remote control
From the SYNC/MIDI menu, this REMOTE option allows
the setting of a number of parameters connected with
remote control of the 2488neo.
MIDI messages can be used for remote control of the
2488neo’s mixer, effects and recorder.
ª
MMC MODE
Sets the transmission mode for MMC (MIDI Machine Control).
OFF: MMC is not transmitted or received.
MASTER: The 2488neo is an MMC master.
SLAVE: The 2488neo is an MMC slave.
When the 2488neo is an MMC master, MMC commands
are sent from its MIDI OUT, for remote control of exter-
nal MMC slaves (including other 2488neo units). When
the 2488neo acts as an MMC slave, MMC commands are
received through its MIDI IN, and external MIDI devices
or another 2488neo can remotely control the 2488neo's
recorder.
ª
MMC Device ID
Sets the MMC device ID. Select 1 to 127 or ALL. MMC
commands are sent and received between masters and
slaves with the same device IDs, but when ALL is selected,
MMC commands are sent and received for all IDs.
NOTE
MMC is used for remote transport control of MMC-
equipped devices, while MTC (MIDI Time Code) is used
to synchronize MTC-equipped devices.
Note that the MMC mode and MMC device ID are not
related to mixer and effect remote control.
ª
REMOTE CONTROL
When PROGRAM CHANGE SCENE is ON, received Program
Change messages change scenes on the 2488neo. When
PROGRAM CHANGE EFF is ON, received Program Change
messages change the 2488neo effects. When CONTROL
CHANGE is ON, received Control Change messages control
the 2488neo's mixer and effect parameters.