Filter
Top Products
TASCAM 2488neo 27
4 − Recording
8 Use the cursor keys and the dial to move around the
display and change values. The settings are shown
as numbers and as a graph.
Use the on-screen SW on the left side of the display (or
use SHIFT and YES/ENTER to turn the EQ on, and
use SHIFT and NO/EXIT to turn the EQ off) to com-
pare the sound with and without the equalization.
9 Press and hold down the RECORD key and press
the PLAY key. The PLAY and RECORD indicators
above the transport keys both light, and the REC
key of track 1 lights solidly.
If you want to rehearse while listening to a metro-
nome click before recording, press the RHSL key to
enter rehearsal mode before conducting the above
operation. In rehearsal mode, if you press the PLAY
key while pressing the RECORD key, a recording
rehearsal starts and you can hear the metronome
click without actually recording.
10 The metronome you set up earlier starts to play,
and you can play your rhythm part along with it,
recording as you go. Press the STOP key when you
are finished.
11 To return to the zero position, where your song
began, press and hold the STOP key, and press the
REW key (marked as RTZ—“return to zero”).
12 When you’ve finished recording, press channel 1’s
REC key to save the track.
13 Press the CLICK key and the indicator goes out.
14 Press the PLAY key and listen to the recorded
sound. To re-record press the REC key for track 1
again and repeat from step 9.