Tascam 2488neo Music Mixer User Manual


 
24 TASCAM 2488neo
This example shows how to record a rhythm guitar, followed
by recording an accompanying lead guitar. This is a simple
recording, but the same procedures also apply to more com-
plicated recordings, so please read this section carefully.
Setting up your first song
To make sure we start with a “clean slate,” we will create a
new song.
TIP
The 2488neo is shipped from the factory with a new
song ready for you to record. However, if the 2488neo
has been used before, it will automatically load the
last song that was worked on, and you may need to
follow these instructions to create a new song. Nor-
mally, though, this will not be needed.
1 Press the MENU key and the MENU screen appears.
Use the cursor keys or the JOG/DATA dial to select
SONG, and press YES/ENTER.
2 In the SONG menu, use the cursor keys or the JOG/
DATA dial to select CREATE, and press YES/ENTER.
3 In the CREATE screen, press the SHIFT key fol-
lowed by the TITLE key to enter titling mode.
4 Use the dial and the cursor keys to give the song a
name up to 12 characters in length (see “Titling”
on page 15). Press YES/ENTER when you are done.
After confirming the song title, the CREATE
screen reappears.
5 On the CREATE screen, press YES/ENTER.
New song
4 − Recording