Filter
Top Products
Initialize
This instrument has many settable functions and storable memories. However, you can return the settings and memory to the
factory-preset status.
INITIAL
1. Press the PROGRAM MENUS button to turn
it on.
• The display changes to the following.
2. Select CONTROL.
• The display looks similar to the following.
3. Select INITIAL.
• This display changes to the following.
4. Use the ▲ and ▼ buttons to select the desired
type of initialization.
• PERFORMANCE includes all the items which are listed
below it.
5. Press the OK button.
• The display changes to the confirmation display. Press
the YES button if you wish to execute the initialization.
Press the NO button if you wish to cancel the procedure.
• Initialization begins. When initialization is completed,
“COMPLETED!” is shown on the display and this instru-
ment returns to the normal performance mode.
• The MIDI & FAVORITES are not initialized by this proce-
dure.
PROGRAM
MENUS
(PR804)
(PR804)
You can also reset all the PERFORMANCE items with the
following procedure:
Turn off the power to this instrument once. Then, while
pressing the three lower left buttons in the RHYTHM
GROUP section (SOUL & DISCO, GOSPEL & BLUES and
COUNTRY & WESTERN) at the same time, turn the power
on again.
Power on settings
When the POWER button of this instrument is turned on, the settings below are automatically set to those suitable for piano
performance.
Sound GRAND PIANO (CONCERT)
CONDUCTOR RIGHT 1
TRANSPOSE C
R1/R2 OCTAVE Off
SYNCHRO START Off
AUTO PLAY CHORD Off
All PART SETTING items for the RIGHT 1 part Appropriate values
PEDAL SETTING Left: SOFT
Center: SOSTENUTO
• When you turn the power on, you can recall all the settings which were in effect at the time you turned the instrument off:
while depressing the sustain (right) pedal, turn on the power.
135
QQTG0665