Technics sx-PR604/M Electronic Keyboard User Manual


 
Panel Memory
PANEL MEMORY stores all the current panel settings so you can recall them at the push of a button.
How to store the panel settings
Store up to 24 panel settings (3 banks x 8 memories). By
storing all the panel settings you use for a song in the same
bank, for example, you can switch from one panel setup to
the next in a flash.
1. Set up the desired panel settings (sounds,
volumes, etc.)
2. Press the BANK VIEW button to turn it on.
The BANK SELECT display appears.
3. Use the buttons to the left of the display to
select the desired bank (A, B, C).
4. With the SET button held down, press one of
the numbered buttons of the PANEL
MEMORY (1 to 8).
The panel settings are now stored in the specified bank
and number.
BANK VIEW
After selecting a bank, you can use the PAGE buttons to go
to the PAGE2 BANK VIEW page and confirm the memory
names of that banks 8 memories.
You can use the BANK and buttons to view other
banks.
You can also access this display by pressing and holding
any of the PANEL MEMORY number buttons (1 to 8) for
a few seconds.
Assign a name to the bank/memory
You can assign names to the banks and memories.
1. Select a bank or memory.
2. Use the PAGE buttons to go to the PAGE2/2
BANK VIEW page on the display.
3. Press the BANK NAMING button to assign a
name to the bank, or the MEMORY NAMING
button for the memory.
The display looks similar to the following.
4. Assign a name.
Press the ABC button to enter alphabetical characters.
While the SHIFT button is pressed, upper case letters are
entered.
Press the 123 button to enter numbers, etc. While the
SHIFT button is pressed, you can enter symbols.
Press the POSITION button to move the cursor.
You can also use the TEMPO/PROGRAM dial to select
the characters.
Press the INS button to enter a space at the cursor
position.
Press the DEL button to erase the character at the cursor
position.
Press the CLR button to erase the entire name.
Press the →← button to center the name.
5. When you have finished assigning the name,
press the OK button.
DEMO
SPLIT
POINT
MAIN
VOLUME
APC/SEQUENCER
VOLUME
MODE
CHORD FINDER
OFF/ON AUTO SETTING BANK STOP
8&16
BEAT
ROCK & POP BALLAD JAZZ & SWING
MOVIE &
SHOW
SOUND
ARRANGER PIANO STYLIST
TEMPO / PROGRAM
PROGRESSIVE
PIANIST
ONE TOUCH
PLAY
SIMPLE PIANOFADE
IN OUT
INTRO & ENDING
START / STOP
SYNCHRO
START
TAP TEMPO
FILL IN
12 1
1234
BEAT
2
METRONOME
SET OFF/ON
1234
VARIATION
MUSIC STYLE
ARRANGER
GOSPEL
& BLUES
SOUL &
DISCO
COUNTRY &
WESTERN
LATIN &
WORLD
MARCH &
WALTZ
MEMORY
LOAD
123
456
MAX
MIN
MAX
OFF
SOLO SOLO
RHYTHM GROUP
SAX &
WOODWIND
ORGAN &
ACCORDION
SOUND
EXPLORER
BRASS SYNTH SOLOIST
MULTI EFFECT
CHORUS REVERB PLAY EASY REC
SET NEXT BANK BANK VIEW
PROGRAM
MENUS
DISK
LOAD
CHORD STEP REC
DISK
IN USE
SOLO
TECHNI-CHORD
DIGITAL EFFECT BRILLIANCE
STRINGS
TRANSPOSE R1/R2 OCTAVE
PART SELECT
CONDUCTOR PANEL MEMORY
LEFT RIGHT 2 RIGHT 1
LEFT RIGHT 2 RIGHT 1
+ +
GRAND UPRIGHT ELECTRIC MODERN
12345678
DIGITAL
DRAWBAR
VOCAL BASS
DRUM KITS MIXTURES MEMORY
GUITAR
& HARPSI
MALLET &
ORCH PERC
SOUND GROUP EFFECTTHEATRE SONIC
SEQUENCER
PIANO
PIANO PERFORMANCE PADS
AUTO PLAY CHORD
FAVORITES
OTHER PARTS/TR
HELP
DISPLAY HOLD
EXIT
LCD CONTRAST PAGEMUTE
SEQUENCER
RESET
COUNT
INTRO
SX-PR804
SET NEXT BANK BANK VIEW
SET
PANEL MEMORY
12345678
Playing the rhythm
Part II Playing the rhythm
55
QQTG0665