Filter
Top Products
8. When you are finished playing back your per-
formance, press the SEQUENCER PLAY but-
ton to turn it off.
CYCLE PLAY
You can have specified measures played back repeatedly.
1. On the SEQUENCER PLAY display, specify
“PLAY” for track numbers you wish to have
played back.
2. Press the CYCLE button.
• The display looks similar to the following.
3. Use the START MEASURE ∧ and ∨ buttons
to specify the beginning measure number.
4. Use the END MEASURE ∧ and ∨ buttons to
specify the ending measure number.
• The measure in which the END command has been stored
can also be specified.
5. Press the START/STOP button.
• Cycle playback of the specified measures begins.
• Normally the rhythm pattern is not played back.
6. To stop cycle playback, press the START/
STOP button again.
• During playback stop, if the SEQUENCER RESET (FILL
IN 1) button is pressed, the SEQUENCER returns to the
measure number specified in step 3. If the SEQUENCER
RESET button is pressed again, the SEQUENCER returns
to measure 1.
• If you press the CYCLE: ON button to turn it OFF, cycle
playback is not possible.
• To return to the SEQUENCER PLAY display, press the
EXIT button.
• Cycle playback can also be specified on the SEQUENCER
PLAY display whenever the CYCLE: ON indication is
shown.
MEDLEY
Multiple recorded songs can be played back in a medley.
1. On the SEQUENCER PLAY display, press the
MEDLEY button.
• The display looks similar to the following.
2. Specify the order of songs in the medley.
• If ALL is pressed, all the files are selected, and the songs
are played back in order in a medley. If ALL is pressed
again, the files are deselected.
• You can use the buttons below the display to select a
song to add to the song list, then press the ADD button
to add it to the list. Repeat these steps to create your
own list of songs to have played back. A M01, M02 etc.
next to the file name indicates its order in the list.
• You can delete a marked file from the medley song list
by selecting it and pressing the ADD button.
• Use the LOOP button to specify ON or OFF for repeat
playback of the medley.
3. Press the START button.
• During medley playback, you can use the SKIP button to
skip to the next song.
If a rhythm progression has been recorded in the
RHYTHM (RHY) part, the MEASURE display used in the
STEP RECORD and EDIT displays conforms to the time
signature data stored in the RHYTHM part.
Adjusting the playback tempo
Even with a song having recorded tempo data, you can use TEMPO/PROGRAM or TAP TEMPO to adjust the tempo to your
liking.
• When the tempo is changed, all the tempo data of that song is automatically changed by the same ratio. Accordingly, even
in song data in which tempo change data is stored, a single adjustment of the tempo produces a natural-sounding playback.
• To return to the original tempo, while the song is stopped press the SEQUENCER RESET button (the tempo data is necessary
at the beginning of the CONTROL track). Note that the tempo change is also canceled when you switch to another song or
load a new song.
• The adjusted tempo is canceled when you begin the recording procedure and the original tempo data will be recorded.
START
CYCLE END MEASURE: 4
1234
END
Sequencer
Part IV Sequencer
68
QQTG0665