Filter
Top Products
6
1.3 PRES-NR (Presence/Noise Reduction) button
Use this to change the presence and noise reduction settings of the amp.
While this button is blinking, you can use value knob [3] to adjust the presence,
and value knob [4] to adjust the noise reduction. This will light (blink) green
when channel A is selected, or red when channel B is selected.
1.4 PEDAL selector
This lets you select one of the sixteen pedal effect models ToneLabSE offers.
When you turn the PEDAL selector, the PEDAL select button will blink, and you
can use value knobs 1–6 to adjust the pedal effect parameters. (For an expla-
nation of each effect, refer to p.35–.) As stated before, pedal effects are con-
nected before the amp.
NOTE: The parameters will be initialized when you switch effect types.
1.5 AMP MODEL selector
This lets you select from sixteen types of classic amp models, including the
legendary VOX AC30TBX. (For details, see p.23.) When you turn the AMP
MODEL selector, the AMP MODEL select button will blink, and you can use
value knobs 1–6 to adjust its parameters.
The operating mode of the preamp and power amp, the response of the tone
controls, and their placement within the circuit will change depending on the
type of amp you select here, precisely replicating the exact gain and tonal
character of the original amp. The all-important power amp stage (class A or
AB) and negative-feedback circuit (or lack thereof) are also carefully simulated.
1.6 CABINET MODEL selector
This selects one of eleven cabinet models that replicate the shape and size of
the cabinet and the type and number of its speakers. (For details, refer to
p.32.) When you turn the CABINET MODEL selector, the CABINET MODEL
select button will blink.
NOTE: While the CABINET MODEL select button is blinking, you can use the value
knobs to adjust its parameters.
1.7 MODULATION selector
This selects one of eleven modulation effect models. When you turn the MOD-
ULATION selector, the MODULATION select button will blink, and you can use
value knobs 1–6 to adjust the parameters of the modulation effect. (For details
on each effect, refer to p.39–.)
NOTE: The parameters will be initialized when you switch effect types.
1.8 DELAY selector
This selects one of eleven delay effect models. When you turn the DELAY
selector, the DELAY select button will blink, and you can use value knobs 1–6
to adjust the parameters of the delay effect. (For details on each effect, refer to
p.45–.)
NOTE: The parameters will be initialized when you switch effect types.