Filter
Top Products
46
2. MULTI HEAD (MULTI HD) MONO IN/MONO OUT 1
This is a model of a tape echo unit boasting three playback heads. The echo from
each head has its own feedback loop, letting you create warm and complex “multi-
tap” echo effects.
3. ANALOG DELAY (ANLG DL) MONO IN/MONO OUT 1
This models an analog delay that used a bucket-brigade device (BBD) instead of a
tape mechanism and was known for its compactness and reliability. It is character-
ized by a warmly distorted sound.
4. MOD DELAY (MOD DLY) MONO IN/MONO OUT 1
This models Korg’s first digital delay, the SDD-3000. You can also use this to produce
chorus or flanger-like effects by setting a short TIME and using the LFO to modulate it.
5. SWEEP DELAY (SWEEP DL) MONO IN/MONO OUT 1
This also models the SDD-3000. Here you can use the envelope of your guitar sig-
nal to control the DELAY TIME, and by setting a short TIME and raising the FEED-
BACK you can produce a distinctive flanger effect. Even with conventional settings
of TIME, you can produce unique effects that would not be possible with an LFO.
[1] “TIME” 1–2000 [ms] Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.
[5] “MODE” 1, 2, 3, 4, 5 Specifies the combination of heads that will be
used.
1: Conventional echo.
2: The delayed sound produces a rhythm of
“ta-ta-ta (rest).”
3: The delayed sound produces a rhythm of
“ta (rest) ta-ta.”
4: The delayed sound produces a rhythm of
“ta-ta (rest) ta.”
5: The delayed sound produces a rhythm of
“ta-ta-ta-ta.”
[6] MIX 0.0–10.0 * Adjusts the mix amount of the delay sound.
[1] “TIME” 1–2000 [ms] * Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.
[6] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay sound.
[1] “TIME” 3–2000 [ms] * Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.
[5] “SPEED” 0.100–10.00 [Hz] * Adjusts the modulation speed.
[6] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay sound.