Filter
Top Products
8
CHAIN/GLOBAL/RENAME/WRITE/EXIT/DISPLAY SECTION
This area displays the name of the program, and the name and value of the
parameter you are editing in the amp or effect section. Use RENAME to edit the
name of the program, and WRITE to save the program.
CHAIN lets you change the connection order of the modulation, delay, and reverb
effects. GLOBAL lets you make MIDI and output settings.
3.1 ▲, ▼ buttons
Use these to edit the value of parameters.
3.2 √√
√√
, ®®
®®
buttons
Use these to select the parameter you want to edit, or to edit the program
name.
3.3 CHAIN button
Use this to change the connection order of the modulation, delay, and reverb
effects. Use value knob 6 or the ▲, ▼ buttons to edit the value.
3.4 GLOBAL button
Use this to make settings related to MIDI or to ToneLabSE’s audio output.
Press the GLOBAL button and use the √√
√√
, ®®
®®
buttons to move through the
menu items in the order shown below. After you have selected a menu item,
use value knob 6 or the ▲, ▼ buttons to adjust the value.
3.5 RENAME button
Use this to change the program name (p.21).
Use the √√
√√
, ®®
®®
buttons to move between spaces (characters) in the display, and
use value knob 6 or the
▲
,
▼
buttons to change the character at that space.
3.6 WRITE button
Use this when you want to save the settings you’ve created (p.22).
3.7 EXIT button
Use this to abort a program-write operation or to cancel a GLOBAL setting.
By pressing and holding this button for a longer time, you can activate/cancel
the Key Lock function, which disables operation of the buttons, selectors, and
knobs (p.18).
OUT SEL: Specifies the output destination (p.13)
CH HOLD: Specifies whether the channel (A/B) selection will be
maintained when you switch programs
(p.17)
MIDI CH: Specifies the MIDI channel (p.59)
PCHG OUT: Specifies the program change message output setting (p.60)
CCHG I/O: Specifies the control change message input/output setting(p.60)
SYEX OUT: Specifies the system exclusive message output setting (p.61)
DUMP CUR: Dumps the current program data from the MIDI OUT con-
nector
(p.62)
DUMP ALL: Dumps all of ToneLabSE’s data from the MIDI OUT con-
nector
(p.62)
3