Filter
Top Products
IntroductionPanel TourSetupPlayingCreating
and Storing
21
HINT: If you’ve used the PEDAL selector to select VOX WAH, the MANUAL param-
eter will automatically be assigned to expression pedal 1 (EXP 1), letting you use
the pedal as a wah pedal.
CHANGING THE CONNECTION ORDER OF THE EFFECTS
(CHAIN)
You are free to change the order in which the modulation effect, delay effect, and
reverb effect are connected.
The effect connection order is saved independently for each program.
1. Press the CHAIN button, and the current connection order is displayed.
2. Use value knob 6 or the ▲, ▼ buttons to change the order.
Display Connection order
MD>DL>RV modulation→delay→reverb
MD>RV>DL modulation→reverb→delay
DL>MD>RV delay→modulation→reverb
DL>RV>M delay→reverb→modulation
RV>MD>DL reverb→modulation→delay
RV>DL>MD reverb→delay→modulation
NAMING A PROGRAM
Here’s how you can name a program.
NOTE: The program name is saved as part of each program. If you switch to a dif-
ferent program or turn off the power before you save, your settings will be lost.
1. Press the RENAME button.
2. Use the √√
√√
, ®®
®®
buttons to move the cursor to the character you want to change
(the selected character blinks), and use value knob 6 or the ▲, ▼ buttons to
change the character.
You can use the following characters.
3. Repeat step 2 to finish entering a name for your program.
4. When you’ve finished entering a name, press the EXIT button (3.7) to return to
the mode you were in.