Filter
Top Products
Connections
ZOOM HD8/HD16
17
Guitar
Bass
(6)
<< only>> The STEREO SUB-OUT jack normally carries the same signal as the MASTER OUT
connectors. (You can therefore also use it as a second headphone jack.) By changing an internal setting, the jack
can be made to carry a mix that is separate from MASTER OUT, with level/pan adjustments for each track/input,
allowing use as a monitor send or effect send. The output level can be adjusted with the knob below the jack.
(11)
(10)
(9)
(9)
(7)
(8)
You can connect the separately available foot switch
ZOOM FS-01 to this jack, for playback start/stop
control or for punch-in/punch-out control.
Loop the cable of the AC adapter around the hook as
shown in the diagram before connecting it to the DC 12V
jack. This will prevent the plug from being pulled out if the
AC adaptor cable is accidentally pulled.
(8)
By connecting the MIDI IN/OUT connectors to another
MIDI device (or a computer with MIDI interface), you can
exchange MIDI information between the HD8/HD16 and
the other device.
If you connect the HD8/HD16 to a computer via the USB
port, you can exchange audio files and MIDI information
between the HD8/HD16 and the other device.
If a computer is connected via the MIDI IN/OUT connectors
or the USB port, the HD8/HD16 can be used as a control
surface for DAW software.
The DIGITAL OUT connector carries the same
signal as the MASTER OUT connectors, but in
digital format (16-bit/44.1 kHz).
(1)
(2)
(3)
R
L
(4)
(6)
(5)
MIDI
IN
MIDI
OUT
Computer
Rear panel
MIDI
interface
AC adapter
Foot switch
(ZOOM FS-01)
OPTICAL
IN
Digital recorder (MD recorder or
DAT recorder or similar)
(11)
(10)
Expression pedal
(ZOOM FP-01/FP-02)
You can connect the separately available foot pedal
ZOOM FP-01/FP-02 to this jack, for adjusting the effect
parameter value.
(7)
Synthesizer or sampler etc.
Dynamic or condenser
microphone
Monitor system (audio components or
amplified speakers etc.)
Headphones
Headphones
Headphone amplifier
Headphones