Zoom HD8 Musical Instrument User Manual


 
Reference [Rhythm]
ZOOM HD8/HD16
95
3. Hold down the [SHIFT] key in the pad section
and press pad 9 (KIT/PROG) so that the pad
lights up.
When the pad is lit, the scale and key/range selection screen for
the bass program is shown.
4. If necessary, change the scale and key/range
settings.
To change the scale type, use the cursor left/right keys. To
change the key/range, turn the dial. When the setting is
completed, press the [EXIT] key to return to the rhythm pattern
selection screen.
5. Hold down the REC [O] key and press the
PLAY [R] key.
A four-beat pre-count (one measure) is heard, and rhythm
pattern recording starts. During recording, a click sound
(metronome) indicating the current tempo/beat setting is
heard. The current position in the rhythm pattern is shown on
the display in measures/beats/ticks.
HINT
The beat and the volume of the pre-count clicks can be
changed (
p. 124).
6. Hit the pads while listening to the
metronome.
Your performance on the pads will be recorded as a bass
sequence according to the quantization setting. The duration
for which you hit the pads will also be recorded.
When you reach the end of the pattern, the unit automatically
returns to the first measure, and real-time input continues.
To change the scale and key/range during real-
time input
Hold down the [SHIFT} key and press pad 9 (KIT/PROG)
to bring up the scale and key/range selection screen. Press
the cursor left/right keys for the scale or turn the dial for the
key/range.
To switch to a drum sequence during real-time
input
Press the [RHYTHM] status key repeatedly, until the key is
lit in green.
To pause real-time input
Press the REC [O] key during recording so that the key
flashes. You can now switch the range and scale or tap the
pads to check which note is assigned to each pad. To resume
recording, press the REC [O] key once more so that the key
is again permanently lit.
HINT
Instead of tapping the pads, you can also input a bass pattern
by using an external MIDI controller connected to the HD8/
HD16’s MIDI IN connector.
After concluding real-time input, you can change the quantize
setting and then record on top of the existing sequence.
(Changing the quantize value will not affect the existing playing
information.)
7. To edit the recorded contents during real-
time input, proceed as follows.
To erase the performance of a specific pad
While holding down the [FUNCTION] key, press the pad
whose note you want to erase. While you are holding down
both the [FUNCTION] key and the pad, the notes of the
corresponding pad is erased from the rhythm pattern.
To erase the performance of all pads
While holding down the [FUNCTION] key, press the
[RHYTHM] status key. While you are holding down both
keys, the performance of all pads is erased from the drum
sequence.
8. When you have finished real-time recording,
press the STOP [P] key.
Rhythm pattern recording will stop. Press the PLAY [R] key
to hear the pattern that you recorded.
Bass sequence
Bass sequence