114 iSeries and AS/400e System Builder
#5701 #5701 PCI 1 Gbps Ethernet UTP IOA
The #5701 PCI 1 Gbps Ethernet UTP IOA allows an iSeries server to attach to IEEE standard 802.3Z high-speed (1 Gbps)
Ethernet LANs. It can also be used to connect to existing 10 Mbps or 100 Mbps Ethernet LANs by using switches with
10/100/1000 Mbps ports. It cannot directly attach to 10 Mbps or 100 Mbps LANs. The adapter supports a UTP CAT 5 media
interface.
Cross over cables are not supported.
The #5701 can be run under a #2892 PCI Integrated xSeries Server. If a #5701 is controlled by a #2892 PCI Integrated
xSeries Server, then specify code #0226 - 1 Gbps Ethernet Specify must be ordered. Order one #0226 for each #5701
controlled by an Integrated xSeries Server.
When the #5701 is not installed in an Integrated xSeries Server, there is a maximum of one #5701 per Multi-adapter Bridge
boundary. Combinations of Integrated xSeries Server controlled and PCI IOP controlled #5701s within an Multi-adapter
Bridge boundary are allowed.
The #5701 can be attached directly to a Linux partition. When ordered as #0621 - Direct Attach - #5701 PCI 1 Gbps
Ethernet UTP IOA, an IOP is not required. When attached directly to a Linux partition, the #5701 cannot be accessed by
OS/400 partitions.
PCI card slots required: One 64-bit slot (32-bit slot is recommended for the Model 270).
There are exceptions for 32-bit slot placement in the Model 270 system unit. See the system unit schematics and PCI Card
Placement Rules for the IBM eServer iSeries Server, REDP-3638, for backplane layout, PCI slot positions, and allowable
#5701 slot plugging rules by model.
Maximum of two IOA under an IOP of which only one can be a Gbps Ethernet Adapter
Supports TCP/IP only. SNA and IPX connections are not supported.
Minimum operating system level: OS/400 V5R2 with PTF MF33086.
The #5701 is a Customer Install Feature.
#6618 #6618 Integrated Netfinity Server (SPD)
The #6618 Integrated Netfinity Server contains an Intel 333 MHz Pentium II Processor, four main storage slots, and three
LAN IOA slots for high performance LAN serving to LAN-attached PCs. All three PCI slots can be used for Integrated PC
Server functions. Two of the three PCI slots can support native iSeries functions. The #6618 requires three IOP slots. The
slots must be adjacent. An external cable is included to enable connectivity to IPCS hardware (keyboard or mouse), which
also allows for optional use of parallel and serial ports.
SPD slots required: Three contiguous slots
OS/2 and Novell NetWare are not supported with OS/400 V5R1.
Minimum operating system level: OS/400 V4R3 and Cumulative PTF Package C8349430
The #6618 was withdrawn from marketing on 28 December 2001.
