162 iSeries and AS/400e System Builder
#2761 #2761 Integrated Analog Modem
The #2761 allows the modem function to be integrated into the IOA and supports multiple analog modem ports (eight
phone lines). The #2761 runs the following protocols without the need for an external modem:
SLIP/PPP uses V.90, so the maximum line speed is 56 Kbps.
SDLC uses V.34, so the maximum line speed is 33.6 Kbps.
Fax uses V.17 to achieve a 14.4 Kbps maximum line speed.
An asynchronous line description is required for Fax and can only be used for Fax. ECS line not supported. Eight 30-ft (8
m) phone cables are shipped with each #2761. To the iSeries or AS/400e server, the #2761 appears like a single IOA with
eight individual resources available. For configuration purposes, each #2761 counts as eight communications lines.
Prerequisite: #2824 PCI Feature Controller
Requirements: The #2761 requires country (region) certification or homologation.
Full-sized PCI card slot
Maximum: One per IOP
Minimum operating system level: OS/400 V4R4 and PTF MF22528, or Cumulative PTF Package C9313440
#2809 #2809 PCI LAN/WAN/Workstation IOP
The #2809 can be used for attaching PCI LAN, WAN, and workstation IOAs to the system. Refer to the #2809 description
within “Workstation controllers” on page 154 for full information about this controller.
Supported on Model 720
Supported for migration only on the #503x Migration Tower
#2824 #2824 PCI Feature Controller
The #2824 can be used to attach PCI LAN, WAN, and workstation IOAs to the system. Refer to the #2824 description in
“Workstation controllers” on page 154 for full information about this controller.
#4800 #4800 PCI Cryptographic Processor
The #4800 is a hardware cryptography solution based on the IBM #4758 card. The #4800 is a half length PCI card. Since
the feature is temperature sensitive, it is shipped separately in specially designed, insulated packaging.
Maximum: Three per system
Prerequisite: #2824 PCI Feature Controller
Minimum operating system level: OS/400 V4R4
#4802 #4802 PCI Cryptographic Processor
The #4802 is a hardware cryptography solution based on the IBM #4758 card. The #4802 is a half-length PC form-factor
PCI card which offers rich cryptography function, secure storage of cryptographic keys, and 12 Mbps performance (at the
card level) for bulk data encryption. The #4802 provides greater security by use of 168-bit key (versus the 56-bit key on the
#4800).
The #4802 is available worldwide. The level of cryptographic function is determined by the Cryptographic Access Provider
licensed program, which is downloaded to the adapter. Due to temperature requirements (card temperature must not drop
below 5 degrees F (-15 degrees C)), the #4802 is shipped separately from the system in special packing.
Prerequisite: An available high-speed slot under a #2824 PCI Feature Controller in a #5065/#5066 PCI Expansion Tower
Maximum: Three per system
Minimum operating system level: OS/400 V4R5
The #4802 was withdrawn from marketing on 21 November 2003.
#6153 V.35 1-line Adapter 20-ft Cable
The #6153 connects to #2623 to support one communications line supporting V.35 protocol using a 20-ft (6.2 m) cable.
SPD slots required: None
Prerequisite: #2623 6-Line Communications Controller
#6173 V.35 1-line Adapter 50-ft Cable
The #6173 connects to #2623 to support one communications line supporting V.35 protocol using a 50-ft (15 m) cable.
SPD slots required: None
Prerequisite: #2623 6-Line Communications Controller
