276 iSeries and AS/400e System Builder
#08xx #08xx Load Source Specify Codes
Beginning with the 0S/400 V5R1 announcement, one of the following specify codes is required on all initial order for Models
820, 830, 840. In addition, one of the following specify codes is required on all upgrades into this model range from previous
models:
#0826 - #4314 Load Source specify
#0827 - #4324 Load Source specify
#0828 - #4317 Load Source specify
#0829 - #4318 Load Source specify
#0830 - #4319 Load Source specify
#0834 - #4326 Load Source specify
#0835 - #4327 Load Source specify
#0836 - #4328 Load Source specify
Manufacturing uses the #08xx specify to place a corresponding disk unit feature in the load source position. Initial orders
and model upgrade orders into the Model 820,830, and 840 from previous models that contain a load source specify, but
no corresponding disk unit feature, are invalid orders. The following specify codes can be changed on model upgrades or
on MES orders.
These specifies can be changed at any time.
The #0826, #0827, #0828 and #0829 were withdrawn from marketing on 01 June 2006.
#4308 #4308 4.19 GB Disk Unit
The #4308 provides an additional 4.19 GB single disk unit with 4.19 GB capacity (7200 RPM).
Supported on Models 820, 830, 840
The #4308 is a Customer Install Feature.
The #4308 was withdrawn from marketing on December 2000.
#4314 #4314 8.58 GB Disk Unit (Ultra SCSI)
The #4314 provides an additional 3 ½-inch 2-byte single disk unit with 8.58 GB capacity (7200 RPM).
Supported on Models 820, 830, 840
Minimum operating system level: OS/400 V4R4
The #4314 is a Customer Install Feature.
The #4314 was withdrawn from marketing on 31 January 2001.
#4317 #4317 8.58 GB 10k RPM Disk Unit (Ultra2 SCSI)
The #4317 provides an additional 3 ½-inch single disk unit with 8.58 GB capacity.
During MES upgrades, #6717, #6817, #8617, and #8817 8.58 GB disk units can be converted to #4317s.
The #4317 is also supported in Linux partitions with SUSE Linux Enterprise Server 9 for POWER or Red Hat Enterprise
Linux AS for POWER Version 3, and AIX 5L for POWER V5.2.
Supported on Models 820, 830, 840
Minimum operating system level: OS/400 V4R4
The #4317 is a Customer Install Feature.
The #4317 was withdrawn from marketing for new orders on 03 December 2002. Feature conversions to #4317 remain
available.
#4318 #4318 17.54 GB 10k RPM Disk Unit (Ultra2 SCSI)
The #4318 provides an additional 3 ½-inch single disk unit with 17.54 GB capacity.
During MES upgrades, #6718, #6818, #8618, and #8818 8.58 GB disk units can be converted to #4318s.
The #4318 is also supported in Linux partitions.
Minimum operating system level: OS/400 V4R4
The #4318 is a Customer Install Feature.
The #4318 was withdrawn from marketing on 01 June 2004 for new orders. Conversions to feature #4318 remain available.
#4319 #4319 35.16 GB 10k RPM Disk Unit (Ultra2 SCSI)
The #4319 provides an additional 3 ½-inch single disk unit with 35.16 GB capacity.
The #4319 is also supported in Linux and AIX partitions with SUSE Linux Enterprise Server 9 for POWER or Red Hat
Enterprise Linux AS for POWER Version 3, and AIX 5L for POWER V5.2.
Minimum operating system level: OS/400 V5R1 with PTFs identified in Information APAR II13102 at:
http://www.ibm.com/eserver/iseries/support
The #4319 cannot be mounted in a #5065 Storage/PCI Expansion Tower.
The #4319 is a Customer Install Feature.
The #4319 was withdrawn from marketing on 12 April 2005.
