350 iSeries and AS/400e System Builder
3570
(cont.)
#9600
#9603
#9710
Attached to AS/400; not Bxx models
AIX Device Driver; not Cxx models
SUN Device Driver; not Cxx models
Minimum operating system level to support #2749 attachment: OS/400 V4R5
Minimum operating system level to support #6501 attachment: OS/400 V3R1
Minimum operating system level to support #6534 or #2729 attachment: OS/400 V4R1
7329-308 SLR100 ¼-inch Tape Autoloader
Machine Description 9406 models
7329 308 7329-308 SLR100 ¼-inch Tape Autoloader
The 7329-308 SLR100 ¼-inch Tape Autoloader is a stand-alone SCSI-based device that
uses the MLR3 QIC technology.
The autoloader, with a magazine capable of holding 8 - SLR100 data cartridges, provides
up to 400 GB of uncompressed data (800 GB assuming 2:1 compression) and a transfer rate
of 5 Mbps. The autoloader can operate in either random or sequential mode depending on
user preference. In random mode, a tape cartridge can be selected from any slot in the
magazine and loaded into the tape drive. In sequential mode, tapes are automatically fed
into the tape drive beginning with slot one of the magazine.
The Model 308 attaches using #2718, #2768, #5702, #5705, #5712, #5715. See 9.5.4,
“#5712, #5715, #5702, #5705, #2718, and #2768 PCI Magnetic Media Controller: Device
cabling rules” on page 370, for a description of the supported attachment configurations.
Minimum operating system level: OS/400 V4R5
60x S0x, 720, 730, 740,
170, 250, 270, SB2,
SB3, 820, 830, 840
9427 8 mm Tape Cartridge Library
Model 210
Model 211
Stand-alone unit. Is not upgradable to the Model 211.
Rack mounted unit. Two Model 211s can be put in a rack side by side.
D, E, F (except D02,
E02), 2x0, 3x0, 4x0,
50S, 53S, 500, 510,
520, 530, 6x0, Sx0,
720, 730, 740, 170,
250, 270, 820, 830, 840
The 9427 Tape Library consists of a single #0701 7 GB 8 mm tape drive or two #0702 7 GB 8 mm tape drives. The effective data transfer
rate is 1 MB per second when compressed (500KB per second in native mode) for each drive. The 9427 is read/write compatible with
IBM 8 mm cartridge tape units.
Two 10-cartridge magazines (one per drive ordered) provide storage for up to 20 8 mm cartridges, with storage capacity of up to 280
GB.
Features:
Power cord (#9800 for 125V or #9833 for 250V)
a. SCSI System-to-Device Cable for the #2621 attach:
– #9870 - 2 m SCSI cable
– #9871 - 4.0 m (13-ft) SCSI cable
– #9872 - 12.0 m (39-ft) SCSI cable
– #9873 - 20.0 m (65.6-ft) SCSI cable
b. SCSI System-to-Device Cable for the #2729, #2749, #6534 attach - requires interposer
– #9245 - 4.5 m (15-ft) SCSI cable
– #9212 - 12.0 m (39-ft) SCSI cable
– #9218 - 18.0 m (59-ft) SCSI cable
– #9174 - interposer
Exterior covers - #9100 black or #9200 white
A cleaning cartridge and two 8 mm cartridges are included.
The 9427 attaches to AS/400 models, except B and C and 9401 models using #2621 Storage Device Controller, #6534 Magnetic Media
Controller (SPD), or #2729/#2749 PCI Ultra Magnetic Media Controller. Maximum of one 9427 per controller.
Minimum operating system level: OS/400 V3R1
3570 Cartridge Tape Subsystems
