244 iSeries and AS/400e System Builder
#5723 #5723 2-Port Async EIA -232 PCI IOA
The #5723 provides connection for two asynchronous EIA-232 devices. Ports are programmable to support EIA-232
protocols at a line speed of 128 Kbps.
Provides two asynchronous ports. Occupies one PCI slot.
Minimum Operating System level required: AIX 5L for POWER, OS/400 V5R2 for iSeries
#6069 #6069 Optional Front Door for 2.0 m Rack
The #6069 provides an black full height rack door on the #0553 iSeries 2.0 m Rack. The door is steel, with a perforated flat
front surface.
Optional feature is a #6580 Optional Rack Security Kit.
Prerequisite: #0553 2.0 m Rack
Initial order or MES
The #6069 is a Customer Install Feature.
#6247 #6247 2.0 m Rack Trim Kit
The #6247 provides a trim kit for the front of a #0553 2.0 m Rack.
Initial order or MES
The #6247 is a Customer Install Feature.
#6248 #6248 1.8 m Rack Acoustic Doors
The #6248 provides front and rear doors for use with the #0551 iSeries 1.8 m Rack. This door kit provides additional
acoustic dampening for use where a quieter environment is desired. The #6248 results in a larger footprint and requires
additional space.
Initial order or MES
The #6248 is a Customer Install Feature.
#6249 #6249 2.0 m Rack Acoustic Doors
The #6249 provides front and rear doors for use with the #0553 iSeries 2.0 m Rack. This door kit provides additional
acoustic dampening for use where a quieter environment is desired. The #6249 results in a larger footprint and requires
additional space.
Initial order or MES
The #6249 is a Customer Install Feature.
#6584 #6584 4 Disk Slot Exp - PCI-X Controller
The #6584 - 4-Disk Slot Expansion is a disk backplane feature for the system unit, which enables the second four disk slots
for use by a separate disk controller plugged into a system unit PCI slot. Disk units plugged into the #6584 are controlled
by either a #5703 PCI-X RAID Disk Unit Controller or #5715 PCI-X Tape/DASD Controller.
A #6584 can be used for obtaining disk mirroring protection with other drives in the system or for enabling these drives in
another system partition.
The #6584 is not usable by either the embedded system unit disk controller or by a #5709 RAID Enabler Card
The #6584 was withdrawn from marketing on 19 November 2004.
#6592 #6592 - 4 - Disk Slot Exp. - Base Ctlr
The #6592 is a disk backplane feature that enables the second set of four disk unit slots in the system to be used.
Disk units plugged into the #6592 are controlled by the integrated base controller or by the #5709 (if present).
#7127 #7127 DASD Expansion Unit
The #7127 DASD Expansion Unit is a concurrent maintenance DASD six position expansion feature that can be ordered
to support an additional six disk units (for a total of 12) in the Model 820 system unit.
Prerequisite: #5157 Feature Power Supply
The #7127 is a Customer Install Feature.
#7780 #7780 2.0 m Rack Side Attach Kit
This feature allows a row of racks without side panels to be bolted together in a continuous suite, using the provided
side-to-side rack connecting hardware. When multiple racks are joined in this way, cables can be easily run between racks
without exiting the continuous rack enclosure. A small gap is maintained between the two adjacent racks, which is filled by
three matching steel trim pieces that snap into place on the front, top, and rear, between each rack. Side panels are needed
only for the two end racks of the suite.
Prerequisites required: #0553 2.0 m Rack
Initial order or MES
The #7780 is a Customer Install Feature.
