Chapter 4. IBM iSeries 270 models 115
#9771 #9771 Base PCI Two-Line WAN with integrated modem
The #9771 is a 2-line WAN adapter. One port supports V.90 56K async data on PPP with an internal modem. The second
port supports multiple protocol communications (WAN).
Connection to the V.90 port uses a telephone cable. Use one of the following cables to connect to the WAN communication
port:
#0348 V.24/EIA232 20-ft. (6 m) PCI cable
#0349 V.24/EIA232 50-ft. (15 m) PCI cable
#0353 V.35 20-ft PCI cable
#0354 V.35 50-ft PCI cable
#0355 V.35 80-ft/24 m PCI cable
#0356 V.36 20-ft PCI cable
#0358 V.36 150-ft/45 m PCI cable
#0359 X.21 20-ft PCI cable
#0360 X.21 50-ft PCI cable
#0365 V.24/EIA232 80-ft PCI cable
#0367 Operations Console PCI Cable
The #9771 supports the #0367 Operations Console PCI Cable on the WAN (RVX) port to directly connect the Operations
Console for OS/400 V5R1 or later or with OS/400 V4R5 and PTF MF25397 (not in cumulative PTF). Direct connection of
the Operations Console is mutually exclusive with V.90 support of the dial-in Operations Console.
The #9771 supports the #5544 System Console on Operations Console on the V.90 port for
dial-in Operations Console
with OS/400 V5R1. An additional #4745 is required on OS/400 V4R5 systems for
dial-in Operations Console support. The
#9771 ships with a country- or region-specific telephone cable. No modem cable feature is required on the order.
ECS is supported over TCP/IP on the V.90 telephone cable port with OS/400 V5R1, or with OS/400 V4R5 and PTF
SF64124. Fax is supported on the V.90 port with OS/400 V5R1, or with OS/400 V4R5 and PTFs MF25290 and SF64604.
To support ECS on the WAN port of the #9771, specify one of the following cables:
#9771 Base PCI Two-Line WAN with integrated modem
#0348 V.24/EIA232 20-ft. (6 m) PCI cable (default)
#0349 V.24/EIA232 50-ft. (15 m) PCI cable
#0365 V.24/EIA232 80-ft PCI cable
ECS operates on the WAN port of the #9771 by changing the *RSRCNAME parameter of the QESLINE and QTILINE line
descriptions to that of the WAN port on the #9771 card.
Remote Power On is not supported. The #9771 does not support the remote ring indicate function.
For further configuration information, see:
http://www.iseries.ibm.com/tstudio/planning/esa/esa.htm
See “Soft rules: iSeries IOA requirements” in PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638
for additional restrictions.
Minimum operating system level: OS/400 V4R5 and supporting PTFs
The #9771 was withdrawn from marketing on 01 October 2005.
