156 iSeries and AS/400e System Builder
#2824
(cont.)
#2824 PCI Feature Controller
Maximum: One in the system unit, two in the #9329/#9330 PCI integrated expansion unit, two in the #5065 Storage/PCI
Expansion Tower
See PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638 for additional restrictions.
Also supported on the #5034 and #5035 Migration Tower I, the #5055 Storage Expansion Unit and the #5066 1.8 M I/O
Tower. It is supported for migration only on the #503x Migration Tower.
Minimum operating system level: OS/400 V4R4
The #2824 is a Customer Install Feature for an MES that only includes CIF features.
The #2824 was withdrawn from marketing on 21 November 2003.
#6050
#9050
#6050 Enhanced Twinaxial Workstation Controller (SPD)
One 8-port attachment is provided to support up to 40 twinaxial devices.
SPD slots required: One
The #9050 is supported as the base twinaxial workstation adapter/controller on the Model 730 and 740.
#6140
#9140
#6140 Twinaxial Workstation Controllerl
The #6140 provides one 8-port attachment to support up to 40 twinaxial devices.
SPD slots required: One
The #9140 is the base twinaxial workstation adapter/controller on the Model 730 and 740.
Maximum #9140: One
Maximum #6140: 58 on Model 720, 175 on Model 730 and 740
#6141
#9141
#6141 ASCII Workstation Controller (SPD)
The #6141 supports up to six ASCII devices.
SPD slots required: One
Maximum: 58 on Model 720; 175 on Model 730 and 740
The #9141 is the base ASCII workstation adapter/controller when there are no other Workstation Controllers specified for
the Model 730 and 740.
#6142 #6142 ASCII 12-Port Workstation Attachment (SPD)
The #6142 plugs into the #6141 ASCII Workstation Controller providing an additional 12 ports.
18 ASCII devices are supported.
One #6142 can be attached per #6141.
SPD slots required: None
#6180
#9280
#6180 Twinaxial Workstation IOA (SPD)
The #6180 provides one 8-port attachment to support up to 40 active twinaxial devices.
Prerequisite: #2629 LAN/WAN/Workstation IOP on the Model 720.
IOA slots required: One in #2629
The #9280 is the base twinaxial workstation IOA residing in slot C of the MFIOP on Model 730 and 740.
Maximum: One
#9751 #9751 MFIOP with RAID (Ultra SCSI) CCIN 6751
The #9751 contains function for controlling 20 disk units, one removable media unit and one CD-ROM unit. It has three
IOA slots for controlling LANs, twinaxial workstations, and communications. IOA slot A is reserved for attaching one #2699
2-Line WAN IOA or one #6149 or #6181 LAN IOA. IOA slot B is reserved for attaching the #9699 Base 2-Line WAN IOA
slot C is reserved for attaching one #2699 Two-Line WAN IOA or one #6180 or #9280 twinaxial IOA. It is occupies two
card slots.
The #9751 does not support integrated hardware disk compression.
Supported on Models 730 and 740
