Chapter 7. IBM iSeries 820, 830, and 840 features and placement 261
7.7 LAN and WAN adapters
LAN and WAN adapters
Comm.
Restrictions
See “Comm. Restrictions” on page 103, for communications rules and restrictions. See PCI Card Placement Rules for the
IBM eServer iSeries Server, REDP-3638 for further placement rules.
#2742 #2742 2-Line WAN IOA
The #2742 2-Line WAN IOA is a WAN IOA that supports up to two multiple protocol communications (RVX) ports when one
or two (in any combination) of the following cables are attached. Select one of the following cables to attach to port 1 or 2
(RVX port):
#0348 V.24/EIA232 20-ft (6 m) PCI cable
#0349 V.24/EIA232 50-ft (15 m) PCI cable
#0353 V.35 20-ft PCI cable
#0354 V.35 50-ft PCI cable
#0355 V.35 80-ft/24 m PCI cable
#0356 V.36 20-ft PCI cable
#0358 V.36 150-ft/45 m PCI cable
#0359 X.21 20-ft PCI cable
#0360 X.21 50-ft PCI cable
#0365 V.24/EIA232 80-ft PCI cable
#0367 Operations Console PCI Cable
The #0367 cable ships with a 25-pin to 9-pin adapter. When #0140 Logical Partitioning Specify is ordered, multiple #0367
cables can be ordered to connect the operations console in each partition.
One #0367 cable per #2742.
When #2742 is selected to support ECS, one of following cables must be specified:
#0348 V.24/EIA232 20-ft (6 m) PCI cable
#0349 V.24/EIA232 50-ft (15 m) PCI cable
#0367 Operations Console PCI Cable
The #2742 can be attached directly to a Linux partition. When ordered as #0613 - Direct Attach - #2742 PCI 2-Line WAN
IOA, an IOP is not required. When attached directly to a Linux partition, the #2742 cannot be accessed by OS/400
partitions.
The #2742 does not support Remote Power On.
Minimum operating system level: OS/400 V5R2
The #2742 is a Customer Install Feature.
