Chapter 7. IBM iSeries 820, 830, and 840 features and placement 263
#2760 #2760 PCI 1 Gbps Ethernet UTP Adapter
The #2760 PCI 1 Gbps Ethernet UTP Adapter feature allows the iSeries server to attach to IEEE standard 802.3Z
high-speed Ethernet LANs (1 Gbps) to provide a significant performance improvement over other LAN solutions. The
adapter supports a UTP CAT 5 media interface. When driven by a #2843 PCI IOP, this adapter only supports TCP/IP.
This adapter can directly attach to 10 Mbps or 100 Mbps networks. The #2760 is supported by a #2790/#2791/#2799 PCI
Integrated xSeries Server. If a #2760 is controlled by a #2790, #2791, or #2799, then one specify code #0225 1 Gbps
Ethernet Specify must be ordered for each #2760 controlled by an Integrated Server.
Maximum: One per Multi-adapter Bridge Boundary. Ignore this maximum for any #2760 controlled (driven) by an Integrated
xSeries Server. Combinations of Integrated Server controlled and PCI IOP controlled #2760s within Multi-adapter Bridge
boundaries are permitted.
The #2760 can be attached directly to a Linux partition. When ordered as #0602 - Direct Attach - #2760 PCI 1 Gbps
Ethernet UTP IOA, an IOP is not required. When attached directly to a Linux partition, the #2760 cannot be accessed by
OS/400 partitions.
PCI slots required: One 64-bit.
There are exceptions for 32-bit slot placement in the Model 820 system unit.
Supports TCP/IP only. SNA and IPX connections are not supported.
Minimum operating system level: OS/400 V5R1
The #2760 is a Customer Install Feature.
The #2760 was withdrawn from marketing on 01 October 2004. The recommended replacement is a #5701 PCI 1 Gbps
Ethernet UTP IOA.
#2772 #2772 PCI Dual WAN/Modem IOA
The #2772 PCI Dual WAN/Modem IOA is a 2-line WAN adapter, with two ports (RJ11) supporting V.90 56K Async PPP
and Fax applications at data rates up to 14.4K with internal modems. Telephone cable is used to connect to the V.90 port.
This is the non-Complex Impedence Matching (CIM) version of the #2772/#2773 card.
The #2772 can be attached directly to a Linux partition. When ordered as #0609 - Direct Attach - #2772 PCI Dual
WAN/Modem IOA, an IOP is not required. When attached directly to a Linux partition, the #2772 cannot be accessed by
OS/400 partitions.
The #2772 does not ship with country- or region-specific telephone cables. A minimum of one modem cable, or a maximum
of two, must be selected/ordered for each #2772. All modem cables ordered or present on a system must be the same
feature number.
#1010 Modem Cable-Austria
#1011 Modem Cable-Belgium
#1012 Modem Cable-Africa
#1013 Modem Cable-Israel
#1014 Modem Cable-Italy
#1015 Modem Cable-France
#1016 Modem Cable-Germany
#1017 Modem Cable-United Kingdom
#1018 Modem Cable-Iceland/Sweden
#1021 Modem Cable-Finland/Norway
#1022 Modem Cable-Netherlands
#1023 Modem Cable-Swiss
#1024 Modem Cable-Denmark
#1025 Modem Cable-U.S./Canada
The feature is country- or region-specific.
Remote ring indicate is not supported.
PCI card slots required: One
Minimum operating system level: OS/400 V5R1
The #2772 is a Customer Install Feature.
The #2772 was withdrawn from marketing on 01 June 2006.
