Filter
Top Products
38
Data Acquisition and Stimulus
Emulation Modules
Emulation Control Interface
The emulation control interface is
accessed from the power up screen of
the Agilent 16700 Series system. The
interface is included with the Agilent
E5901A/B emulation modules.
Designed for hardware engineers,
this graphical user interface provides
the following features:
• Control over processor execution:
run/break/reset/step.
• Register display/modification.
• Memory display/modification in
various formats including disas-
sembly for code visualization.
Memory modification or memory
block fill can be done to check
processor memory access or to
reinitialize memory areas.
• Multiple breakpoint configuration:
hardware, software, and processor
internal breakpoint registers.
• Code download to the target.
• Command scripts to reproduce
test sequences.
• The ability to trigger a measure-
ment module on a processor break
or to receive a trigger from the
logic analysis system’s measure-
ment modules.
Integrated Debugger Support
When the hardware turn-on phase is
completed, the same Agilent emula-
tion module can be connected to
high-level debuggers for C or C++
software development.
You can achieve the functionality of
a full-featured emulator by using a
third-party debugger to drive the
installed Agilent emulation module.
This gives you complete microproces-
sor execution control (run control).
Figure 4.11. Emulation control interface.