Filter
Top Products
16
Panel Descriptions
27.
Insertion / Input jacks 1–4
These can be used either as insertion jacks or as input jacks.
Turn the Insertion/Input Select switches on/off to select whether these jacks will function as insertion jacks or as
input jacks.
For details, refer to
“Inserting an external effects processor”
(p. 32).
28.
Insertion / Input jack select switches
Turn the Insertion/Input Select switches on/off to select whether insertion / input jacks 1–4 will function as insertion
jacks or as input jacks.
For details on use, refer to
“Inserting an external effects processor”
(p. 32).
Insertion jack mode:
Set the switch to INSERT ( button outward). Insertion/Input jacks 1–4 will function as insertion jacks.
This setting lets you insert external effects processors into the inputs of combo input jacks 1–4 (TRS phone type).
Input jack mode:
Set the switch to INPUT ( button inward). Insertion/Input jacks 1–4 will function as input jacks.
This setting lets you input audio signals from audio devices or MIDI sound modules (+4 dBu fixed, phone type,
unbalanced).
If you use these as input jacks, the input from combo input jacks 1–4 will be turned off.
See also
“Inserting an external effects processor”
(p. 32).
29.
Output jacks 1–8 (phone)
These are output jacks for analog audio signals.
UA-1000_e.book 16 ページ ２００３年８月６日 水曜日 午前１１時５２分