Filter
Top Products
System Menu
P. 123
Power Up Settings
This determines whether the CP stores your preferred panel and system settings as the default
settings and applies them automatically when the instrument is turned on.
Select Save Current Settings (L2) in the Power Up Setting menu to save the current panel settings
automatically as the default settings when the CP is turned on.
Select Restore Factory Settings (L3) to return the CP to the factory default settings. The original
factory settings will now be used by the CP when it is turned on.
• The CP never automatically stores Panel and System settings. If you make any new changes that
you want to save, you must use the Save Current Settings (L2) command.
L2 Saves the current settings.
L3 Restores the initial factory settings.
F1 Takes you to the System menu.
F7 Applies the selected settings.
L 1
L 2
L 3
L 4
L 5
F 1 F 2 F 3 F 4 F 5 F 6 F 7
R 1
R 2
R 3
R 4
R 5