Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Tab Area Settings
26
Table 8 summarizes date and time setting options:
Table 8: Setting the Date and Time
Set Date and Time Procedure
From a connected PC
Clock
1. Click the “Set Now” button.
2. Click Read (from device) to check the updated
values.
If you want the time and date to be set whenever writing a configuration, check “Set from PC on Write
Configuration”.
Manually
1. Click the dropdown box.
2. Select the desired date and time from the
dropdown box.
For example, select January 10
th
.
3. Click the Set Now button.
4. Click Read (from device) to check the updated
values.
From an NTP (local)
server
1. In the Sync Date and Time area, check “From
Server Address”.
2. Type the IP address.
For example, 192.168.0.6
3. Set the time zone according to UTC.
For example, the time in Jerusalem is
UTC +2:00
4. Set the DST to ON (for adjusting the time to the
“summer” clock) if required.
5. Click the Read (from server) button (below the
IP number).
6. Click Read (from device) to check the updated
values.
The device updated date and time appear