Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Introduction
2
1.2 Available Commands for Room Control Ports
Since each Room Controller includes different ports
1
, you will find that not all the available
commands apply to your room controller.
Table 2 defines the sections that apply to each room controller:
Table 2: Room Controller Commands Available
Machine
IR OUT RS-232
6.11.1
RS-485
6.11.1
Ethernet
6.11.1 6.11.1
GPI/O Relay
6.8
Switcher
6.11.2
Power
Amplifier
6.11.6
LCD Label
6.11.7
Button Light
6.11.5 6.11.3
RC-2
RC-2C
RC-52
RC-52N/A
SV-551
See note 1 See note 1
SV-552
See note 1 See note 1
SL-1
See note 1 See note 1
RC-6x
RC-6xL
SL-14RC/N
See note 1
RC-74DL
RC-53D
RC-53DLC
RC-54DL
RC-5B2, RC-5B4
RC-3TB/U
See note 3
RC-13TC
WP-500
WP-501
VP-31KSI
VP-81KSI
SL-12
See note 1 See note 1
SL-10
See note 1 See note 1
Virtual Device
Machine
Ignore Button
Panel Lock
6.11.4
Delay
6.11.8
Timer Start/Stop
6.11.12
States
6.11.9
LEDs Light
6.11.11
RC-2
6.11.10
RC-2C
RC-52
RC-52N/A
SV-551 See note1 See note1
See note 1 See note 1
SV-552 See note1 See note1
See note 1 See note 1
SL-1 See note1 See note1
See note 1 See note 1
RC-6x
RC6xL
See note 2
SL-14RC/N
RC-74DL
RC-53D
RC-53DLC
RC-54DL
RC-5B2, RC-5B4
RC-3TB/U
RC-13TC
WP-500
WP-501
VP-31SKi
VP-81KSI
SL-12 See note1 See note1
See note 1 See note 1
SL-10 See note1 See note1
See note 1 See note 1
Virtual Device
Note 1: This command can be available, depending on the auxiliary device connected to the Master room controller
Note 2: Only for digital models (for example, the RC-63DL)
Note 3: The device mimics the button light commands of SL-14RC
1 For example, the RC-2 includes only an RS-232 port, so the other commands are not available for this machine