Filter
Top Products
Contents
iii
Figure 22: Setting the LCD and Button Label Names 17
Figure 23: Final Appearance of the “DVD Control” Virtual Device Front Panel in K-Config 17
Figure 24: The RC-4 Remote Controller 18
Figure 25: The Port Manager 19
Figure 26: The Drivers Tree Window 20
Figure 27: Selecting a Driver 20
Figure 28: Assigning a Driver to a Port 20
Figure 29: Writing a Port Description 21
Figure 30: Serial Settings Window 21
Figure 31: The Port Commands 21
Figure 32: The Assigned Driver in the Control Room Area 21
Figure 33: Ethernet Settings Example 22
Figure 34: Ethernet Port in the Port Command List 22
Figure 35: Ethernet Port in the Port Command List (Select Command) 22
Figure 36: Set Volume Properties 23
Figure 37: Selecting the EDID File 23
Figure 38: Loading the EDID File 23
Figure 39: EDID File Uploaded 23
Figure 40: The Device Settings Tab 24
Figure 41: Device Selection Dialog Box 24
Figure 42: The Device Settings Tab (Device with Time Server Options Connected) 24
Figure 43: Web Settings Window 27
Figure 44: The Standard Built-in Triggers List 28
Figure 45: Selecting the Action Type (Port Command in this example) 29
Figure 46: Selecting the Port 29
Figure 47: Selecting the Command 30
Figure 48: Action Description 30
Figure 49: The New Action in the Action List 30
Figure 50: The Action List 30
Figure 51: The All On Trigger (with actions assigned) 31
Figure 52: Button 6 - Click Action List 31
Figure 53: Selecting the Action to be replaced from the Action List 32
Figure 54: Selecting a New Action 32
Figure 55: The New Action Added 32
Figure 56: The Trigger Name Window 33
Figure 57: Writing a Trigger Name 33
Figure 58: The New Custom Trigger in the Available Triggers List 33
Figure 59: The Scheduling Window 34
Figure 60: Setting the Schedule
34
Figure 61: The Monitor Events Trigger Window 35
Figure 62: Adding a Monitor Event to the Available Triggers List 35
Figure 63: Timer Trigger Flowchart – Power ON Example 36
Figure 64: The Timer Trigger Name Window (Power ON) 36
Figure 65: The Timer Trigger in the Triggers List 37
Figure 66: Set the Timeout 37
Figure 67: Timer Trigger Action List 37
Figure 68: Projector Power ON Command in the Button Trigger Action List 38
Figure 69: Selecting the Timer Start/Stop Action 38
Figure 70: Selecting the Timer Start/Stop Action (Start State Selected) 38
Figure 71: Active Button Trigger Action List 39
Figure 72: Add the Monitor Event 39
Figure 73: Monitor Event Action List 39
Figure 74: Timer Trigger Flowchart – Inactivity Example 40
Figure 75: The Timer Trigger Name Window (Inactivity) 40
Figure 76: The Timer Trigger in the Triggers List 41
Figure 77: Set the Timeout 41
Figure 78: Timer Trigger Action List 41
Figure 79: Button 1 Action List 41
Figure 80: Add the Stop Timer Action 42