Filter
Top Products
The Driver Manager
73
The selected list of commands will appear when setting commands in the port command area:
Figure 157: The Selecting commands in the Port Command Area
9.2 Defining Queries
Queries are used to define the Site-CTRL monitored operation parameters (such as the projector
lamp hours and the power status of the main display device).
During normal operation, a query
1
The list of queries appears in the Queries area in the Driver Manager:
, derived from the protocol of the main display, is sent to the
main display, regarding its lamp hours and/or power status. The main display sends the relevant
serial command back to the Master RC which includes the parameter details; the Master RC
interprets these commands according to the definition in the Query Details window and sends the
real time status to the Site-CTRL and Web Access.
• The Lamp Hour query monitors the lamp usage (in hours) of the main display (see Section
9.2.1
• The Power query monitors the power status of the main display (see
)
Section 9.2.2
To open the Query Details window:
)
1. Select the desired Query (Lamp Hour or Power) in the Queries area (for example, select Lamp
Hour):
Figure 158: Queries Area
2. Click the Query Details button. The Query Details window appears:
1
Or question