Filter
Top Products
34
Adjusting the rate at which the percussion decays
You can shorten the decay time of the percussion sound.
1. Press the Percussion [Fast Decay] button to switch the indicator between lit/unlit.
Percussion [Fast Decay] Button Explanation
Lit The percussion sound will disappear quickly. The percussion will have a sharper attack.
Unlit The percussion sound will disappear slowly. The percussion will have a more gentle attack.
Using the harmonic bar settings of the panel
If you’ve switched registrations so that the Vintage Organ settings have changed, you can switch the Vintage Organ settings to the positions (settings)
of the harmonic bars on the panel.
1. Press the [H-Bar Manual].
The part whose indicator is lit will have the settings of the harmonic bar positions (settings) of the panel.
Adding an eect to the sound
You can add a vibrato or chorus eect to the vintage organ voice.
1. Press the [Vib/Cho] button so it’s lit.
The name of the eect is shown for several seconds.
2. While the name of the eect is shown in the display, use the Value [-] [+] buttons to select the desired eect.
Type Explanation
Vibrato Applies a vibrato eect to the sound.
Chorus Applies a chorus eect to the sound.
MEMO
You can select the part to which the vibrato eect or chorus eect is applied (p. 92).