Filter
Top Products
79
Recording Your Performance
Layering a new recording onto SMF music les
You can load commercially available SMF music les into the ATELIER, and record your own performance on top of it. During recording, the data you’ve
loaded will be played back, while you record your performance.
4 5
2 3
1. Prepare the SMF music les.
If you’re using SMF music les from USB memory, connect it to the USB Memory connector.
2. Press the [Song] button (conrm that its indicator is lit).
The Song Select screen appears.
3. Press the [Media] button to select “USB Memory.”
4. Press the Value [-] [+] buttons to select the SMF music les that you wish to load into internal memory.
5. Press the [Load] button.
The selected performance data will be loaded into internal memory.
6. Select the panel settings needed for recording the performance.
7. Record as described in “Re-recording” (p. 78).
MEMO
The performance data you recorded can be saved on a USB memory, or “Favorites” (p. 81).
* Commercially sold music les can also be loaded into the ATELIER, but for reasons of copyright protection, cannot be saved in SMF format.
* The performances of Channel 2 in SMF music les are deleted when pedal performances are recorded over again.