Filter
Top Products
59
Performing with Rhythms
Selecting Rhythms Stored in User Memory or USB Memory
Here’s how to play rhythms that are stored in user memory or USB memory.
You can select these rhythms by choosing the User group.
MEMO
With the factory settings, rhythms are already stored in user memory.
1. If you want to select rhythms from USB memory, connect your USB memory to the USB Memory connector.
2. Press the Rhythm [Ballad/User] button a number of times to select the user group.
The Rhythm select screen appears.
3. Press the [Media] button to select a memory.
If you want to select the registration to USB memory, select “USB Memory.”
If you want to select the registration to user memory, select “User.”
4. Press the Value [-] [+] buttons to select a Rhythm.
The indicator of Rhythm [Ballad/User] button will blink.
5. After selecting a rhythm, press the blinking Rhythm [Ballad/User] button once more.
The Rhythm [Ballad/User] button stops blinking and remains lit, indicating that the rhythm has been selected.
MEMO
If you wish to copy a Rhythm saved on USB memory to User memory, refer to “Copying Rhythms (Copy Rhythm)” (p. 103).
What is User Memory?
“User Memory” refers to an area inside the instrument where you can store the registration you create and the performances you record.
Registration and SMF music les saved on USB memory can also be copied to user memory (p. 101, p. 101).
User memory is quite useful, since anything you place there will be retained even while the power is turned o.
The following things are stored in User memory:
• Songs you’ve registered in “Favorites”
• Rhythms
• Registration sets