Filter
Top Products
96
Adjusting the Volume Balance of the
Arranger (AccompPartBalance)
You can adjust the volume balance of each part.
1. Press the [Utility] button.
2. Use the Menu [
] [ ] buttons to select
“AccompPartBalance.”
3. Press the [Utility] button.
The Accomp Part Balance screen appears.
MEMO
You can also access the Accomp Part Balance screen from the Part
Balance screen (p. 35) by pressing the Menu [
] button.
4. Use the Menu [ ] [ ] buttons to select the part that you
want to adjust.
The arranger accompaniment is divided into six parts: A1–A6.
The content assigned to each part will depend on the accompaniment.
5. Use the Value [-] [+] buttons to adjust the volume.
Value Explanation
0–12 Higher values make the volume louder.
Press the [Display/Exit] button to return to the basic screen.
Registration Settings
Using the Foot Switch to Switch Registrations
(Registration Shift)
A foot switch of the pedalboard (PK series; sold separately) can be
assigned the function of successively switching registrations. Each
time you press the foot switch, the registration will be changed.
MEMO
A pedal switch (DP series; sold separately) connected to the Pedal
(Control) jack will have the same function as the right foot switch.
* The Registration Shift settings are stored to each individual
Registration Set. When “RIGHT + Load Next” is assigned to the foot
switch and the Load Next function (p. 72) is used to switch Registra-
tion Sets saved to a USB memory, set the Registration Shift setting
to “RIGHT + Load Next” for all saved Registrations.
Value Explanation
OFF
You can use a function assigned to the foot
switch.
RIGHT
The right foot switch is dedicated to switching
registrations.
The function assigned to the right foot switch
cannot be used.
LEFT
The left foot switch is dedicated to switching
registrations.
The function assigned to the left foot switch
cannot be used.
RIGHT + Load Next
The right foot switch is dedicated to switching
registrations. The function assigned to the right
foot switch cannot be used.
Selecting the Registration [8] button and
pressing the right foot switch activates the Load
Next function, calling up the next registration
saved to the USB memory, or user memory.
The Registration Load window appears in the
display.
When you then press the right foot switch
again, the Registration Set is conrmed, and the
Registration [1] button is selected.
Example:
1→2→3...→8→Load Next→(Next Registration) 1