Filter
Top Products
69
Storing Your Performance Settings (Registration)
8. Press the Value [-] [+] buttons to select the format in which the data will be saved.
Display Explanation
ORIGINAL
Save formats that can be used with the AT-350C. When saved in this format, the data can also be used by AT-S
series, AT-900, AT-900C AT-800, AT-300, AT-100, AT-75, AT-45 and AT-15 devices.
R-SERIES Save formats that can be used with AT-R Series devices.
9. Press the [Save] button.
Saving of the registration data will begin.
When saving ends, the “------------” in the screen will change to the registration name that you saved.
* Never remove the USB memory or turn o the power while the operation is in progress. Doing so will damage the ATELIER’s internal memory or
USB memory, making it unusable.
If the following screen appears
If you select a number at which a registration has already been saved and press the [Save] button, the following screen appears.
If you wish to update the contents of the Registration data
1. Press the [Rec] button.
The Registration will be rewritten.
If you wish to save new data instead of updating the registration
1. Press the [Reset] button to cancel the procedure.
Rewriting of the Registration will be canceled.
2. Press the Value [-] [+] buttons to select a number for which “------------” is displayed on the upper right of the screen.
3. Press the [Save] button to save the Registration set.
When saving is complete, the saved registration name will be displayed.