Filter
Top Products
70
Loading Previously Saved Registration Sets Into the ATELIER
Here’s how to recall a previously saved Registration set from the User memory or USB memory into the memory of the ATELIER.
Registrations can be selected in the following three ways.
Loading a Set of Registrations
You can load a “set” (a collection of settings for Registration buttons [1]–[8]) from USB memory or user memory.
Loading an Individual Registration (p. 71)
Recall the settings of one of the Registration [1]–[8] buttons.
Recalling the Order that the Registrations are Saved on the USB Memory or User Memory (Load Next) (p. 72)
Assign “RIGHT+ Load Next” to the foot switch, and recall Registration sets in the order in which they are stored in USB memory or user memory.
* Be aware that when you load Registrations from a USB memory or user memory, the Registrations that were previously in internal memory will be
lost. It is a good idea to save important Registrations to USB memory or user memory (p. 68).
Loading a Set of Registrations
You can load a “set” (a collection of settings for Registration buttons [1]–[8]) from USB memory or user memory.
1. If you want to load a registration from USB memory, connect your USB memory to the USB Memory connector.
2. Press the [Registration] button to make the indicator light.
The Registration select screen appears.
3. Press the [Media] button to select the desired media.
If you want to load from the registration of USB memory, select “USB Memory.”
If you want to load from the registration of user memory, select “User.”
4. Press the Value [-] [+] buttons to select the Registration that you wish to load into internal memory.
To cancel the procedure, press the [Registration] button.
5. Press the [Load] button.
When loading is complete, the Registration Select screen reappears.