Filter
Top Products
40
Adding Resonance to the Sound (Sustain Eect)
Sustain allows you to add a Sustain eect or decay to each voice after the keys are released.
The Sustain eect can be added simultaneously to the Upper (except the Solo Part), Lower, and Pedal voices.
* The Sustain eect will not be applied to the Solo part and vintage organ part voice.
1. Press the [Utility] button.
2. Press the Menu [
] [ ] buttons to select the “Sustain.”
3. Press the [Utility] button.
4. Press the Menu [
] [ ] buttons to select the desire part.
Part Upper, Lower, Pedal
5. Press the Value [-] [+] buttons to switch ON or OFF.
To return to the basic screen, press the [Display/Exit] button.
MEMO
By holding down the [Utility] button and using the Menu [ ] [ ] buttons, you can jump to editing screens for the octave shift (p. 37) and reverb
eect (p. 41) of the same part.
Changing the sustain length
The sustain length can be set independently for the each keyboard.
1. Press the [Utility] button.
2. Press the Menu [
] [ ] buttons to select the “Sustain.”
3. Press the [Utility] button.
4. Press the Menu [
] [ ] buttons to select “Length.”
5. Press the Menu [ ] [ ] buttons to select the part whose sustain length you wish to adjust.
Part Upper, Lower, Pedal
6. Press the Value [-] [+] buttons to adjust the setting.
Settings SHORT, MIDDLE, LONG
To return to the basic screen, press the [Display/Exit] button.