Filter
Top Products
71
Storing Your Performance Settings (Registration)
Loading an Individual Registration
Recall the settings of one of the Registration [1]–[8] buttons.
1. If you want to load a registration from USB memory, connect your USB memory to the USB Memory connector.
2. Press the [Registration] button to make the indicator light.
The Registration Select screen appears.
3. Press the [Media] button to select the desired media.
If you want to load from the registration of USB memory, select “USB Memory.”
If you want to load from the registration of user memory, select “User.”
4. Press the Value [-] [+] buttons to select the Registration that you wish to load into internal memory.
5. Press the [Utility] button.
6. Press the Value [-] [+] buttons to specify the Registration button number to be loaded.
To cancel the operation, press the [Utility] button.
7. Press the [Utility] button.
8. Press the Value [-] [+] buttons to specify the storage destination Registration.
The registration will be loaded to the Registration button of the number you’ve selected here.
9. Press the [Utility] button.
The following display appears.
To cancel the procedure, press the [Reset] button.
10. Press the [Rec] button.
When the Registration has been loaded, the Registration Load screen reappears.