Filter
Top Products
101
Convenient Functions
■
Copying Measures (Copy)
You can copy a portion of a performance to a different bar in the
same Part or to a measure in another Part. This is handy when you’re
composing a song that repeats a similar phrase.
fig.e-copy-e
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
fig.d-edit-Copy-e_45
■
Correcting Timing Discrepancies (Quantize)
You can correct for timing discrepancies in a recorded performance
by automatically aligning the music with the timing you specify. This is
called “Quantize.”
As an example, let’s say that the timing of some quarter-notes in a
performance is a little off. In this case, you can quantize the
performance with quarter-note timing, thus making the timing
accurate.
fig.e-quantize-e
Refer to “Basic Operation of the Editing Functions” (p. 100) for
instructions.
fig.d-edit-quantize-e_45
Item
Explanation
From
Measure number of the first measure of the segment to be
copied
For
Number of measures to be copied
When <All> is selected, all of the measures are copied.
Src
Copy-source Track button or part number
Choosing <All> copies all Parts. If you choose a Track
button, you can only copy to the selected Track button.
You cannot copy to the other Track buttons. When <All>
or a track button is selected, “- - -” appears in the “Dst”
field.
Dst
Copy-destination part number
Mode
Data can be copied in the following three ways:
Replace
If there is a performance recorded at the
copy destination, this previous recording is
erased, and the copied data is written in its
place.
Mix
If there is a performance recorded at the
copy destination, the copied data is
layered over the previous recording. If the
Tones used for the copy source and copy
destination are different, the copy-
destination Tone is used.
Insert
If there is a performance recorded at the
copy destination, the copied portion is
inserted without erasing the previous
recording. The song is lengthened by the
number of inserted measures.
1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 10
Ex. To copy measures 5–7 to measure 8.
To
Copy-destination measure number
When <End> is selected, the data is copied to the end of
the song.
Times
Number of times the data is to be copied
Item
Explanation
From
Measure number of the first measure of the
segment to be quantized
For
Number of measures to be quantized
When <All> is selected, all of the measures are
quantized.
Tr/Pt
Track button or part number to be quantized
Choosing <All> quantizes the same passage in all
Parts.
Resolution
Quantization timing
Select one of the following values
1/2 (half note), 1/4 (quarter note),
1/6 (quarter-note triplet), 1/8 (eighth note),
1/12 (eighth-note triplet), 1/16 (sixteenth note),
1/24 (sixteenth-note triplet),
1/32 (thirty-second note)
Item Explanation
1 2 3 4
1 2 3 4
Example: Quarter-note resolution
Example: Sixteenth-note resolution
Actual note data
Note data after quantization
Actual note data
Note data after quantization
HPi-7S-e.book 101 ページ ２００７年８月２７日 月曜日 午後２時３９分