Roland HPi-7S Musical Instrument User Manual


 
17
Before You Begin Playing
Connecting the Power Cord
1.
Make sure that the [Power] switch located at the left side
of the front panel is off (in the upward position).
2.
Turn the [Volume] knob all the way toward the left to
minimize the volume.
3.
Connect the included power cord to the AC inlet located at
the rear of the bottom panel.
4.
Plug the other end of the power cord into an AC outlet.
fig.ACCord-e
Use only the included power cord.
Opening and Closing the Lid
Opening the Lid
1.
Use both hands to lift the lid lightly, and slide it away from
yourself.
fig.Lid
Closing the Lid
1.
Pull the lid gently toward yourself, and lower it softly after
it has been fully extended.
Be careful not to get your fingers pinched when opening or
closing the lid. If small children will be using the HPi-7S,
adult supervision should be provided.
To prevent accidents, the lid must be closed when
transporting the piano.
OFF
Upward
position
On
Lower
position
Power Cord
AC Outlet
NOTE
NOTE
NOTE
HPi-7S-e.book 17 ページ 2007年8月27日 月曜日 午後2時39分