Filter
Top Products
98
Convenient Functions
USB memory
The memory backup settings can be restored to the original default
condition. This operation is referred to as “Factory Reset.”
When you execute “Factory Reset,” all settings you’ve stored
up to that point will be cleared, and reset to their factory-set
condition.
1.
In step 2 on p. 86, select “Factory Reset” and press the
[ ] button, and a message will be displayed.
2.
Press the cursor right button to select <OK>, then press the
[ ] button; the Factory Reset is executed.
Once the Factory Reset has been completed, switch the power
off, then on again.
Never turn off the power while the display indicates
“Executing....” Doing so will damage the HPi-7S’s internal
memory, making it unusable.
Executing this operation will not erase the songs from
“Favorites“ or USB memory. If you want to erase all songs
from the HPi-7S’s internal memory, refer to “Formatting the
User Memory (Initialize User Memory)” (p. 97).
Connecting the HPi-7S to a V-LINK compatible image device allows
you to control the images with the HPi-7S.
Refer to “Making the Settings” (p. 86) for instructions.
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
While V-LINK is switched on, no sound is produced when
you press any of the twelve keys at the left end of the
keyboard. In addition, an icon indicating that V-LINK is on
appears in the Notation screen.
The “Panel Lock” function locks the HPi-7S in a state where all buttons
will be disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
1.
Press the One Touch [ ] button and [Count/Marker]
button simultaneously.
Pressing buttons during playback or recording of a song
stops the playback or recording.
Canceling the Panel Lock function
1.
Once again, press the One Touch [ ] button and
[Count/Marker] button simultaneously.
Panel Lock will be cancelled when you turn off the power.
Restoring the Original Default
Settings (Factory Reset)
NOTE
NOTE
Using the V-LINK Function
Setting Explanation
On
Switches to Image Control mode. You can control
images using the twelve keys at the left end of the
keyboard.
Off
Cancels Image Control mode.
Disabling the Buttons (Panel Lock)
V-LINK ( ) is a function that allows music and
images to be performed together. By using MIDI to connect two
or more V-LINK compatible devices, you can easily enjoy
performing a wide range of visual effects that are linked to the
expressive elements of a music performance.
NOTE
C1 D1 E1 F1 G1A0
A0 – G#1
B0
NOTE
NOTE
HPi-7S-e.book 98 ページ ２００７年８月２７日 月曜日 午後２時３９分