Filter
Top Products
111
Connecting to Other Devices
You can connect a computer monitor or other external display or a
television to the HPi-7S, enabling you to display the Panel, Slide show
or Notations on a larger screen.
■
Connecting an External Display
Displays That Can Be Connected to This
Instrument
In general, a great many of the VGA monitors and
multiscan monitors that are available on the market are
compatible with this instrument. However, before you
connect any monitor, make sure it meets the following
specifications:
Confirm that the display to be used is compatible with the
frequencies mentioned above. Using a display that is not
compatible with the above frequencies may result in
incorrect image output when images move, and in certain
cases may even damage the display.
Making the Connections
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
1.
Turn off the power to the HPi-7S and the display to be
connected.
2.
Connect your display to the HPi-7S.
Use display cable (sold separately) to connect the display to the
Ext Display connector on the HPi-7S.
Do not connect external devices to both the external display
connector and the Video Out connector at the same time.
Doing so may cause the display to appear strange, or may
cause malfunction.
3.
Switch on the HPi-7S (p. 18).
4.
This sets the display format (p. 112).
5.
Switch on the connected display.
For more on handling the external display, refer to your
display’s owner’s manual.
■
Connecting a Television
Making the Connections
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
1.
Turn off the power to the HPi-7S and the television to be
connected.
2.
Connect your display to the HPi-7S.
Use a video cable (sold separately) to connect the HPi-7S’s Video
Out jack with the television’s video input jack.
3.
Turn on the power to the HPi-7S ( p. 18).
4.
This sets the display format (p. 112).
5.
Turn on the power to the television.
Connecting an External Display
or Television
Resolution 640 x 480 pixels
Horizontal scan frequency 31.5 kHz
Vertical scan frequency 60 Hz
Connector 3-row, 15-pin D-Sub type
Signal Analog
External Display
Jack Panel
Ext Display Connector
HD D-Sub type
(Mini)
HD D-Sub type
(Mini)
Display Cable
NOTE
NOTE
NOTE
Television
Jack Panel
Video Out jack
Video Cable
NOTE
HPi-7S-e.book 111 ページ ２００７年８月２７日 月曜日 午後２時３９分