Filter
Top Products
82
Saving the Performance
Selecting the Save Number
7.
Press the cursor right button one or more times to select <Save Destination>.
fig.RenameSong4-e
8.
Press the cursor up or down button to select the save-destination number.
If a song name is displayed with a number, a song is already saved to that number.
If you select a number with a previously saved song and then proceed to save a new
song, the previously saved song will be erased. If you do not want to lose a saved
song, select a number with no song name indicated in the save-destination column.
Saving the Song
9.
Press the [ ] button.
Saving begins. The time required for saving ranges from several seconds to half a
minute or more. Don’t take the USB memory out of the external memory connector until
the saving process is finished.
Press [ ] button several times; the “File” screen returns to the display.
The selected setting turns orange.
Save Destination
Displays the save-destination song
number.
If you select a song number that
displays a song name, and save a new
song, the previous song will be erased.
NOTE
Never turn off the power while
the saving operation is in
progress. Doing so will damage
the HPi-7S’s internal memory or
USB memory, making it
unusable.
It’s a good idea to get into the
habit of moving the write-
protect tab (p. 10) on the
floppy disk to the “Protect”
position when you’ve finished
saving your data. Keeping the
tab at “Protect” prevents
operations that could erase
your songs by mistake.
HPi-7S-e.book 82 ページ ２００７年８月２７日 月曜日 午後２時３９分