Filter
Top Products
14
MT-90U Basic Operation
<fig.00-06.e.eps>
1.
Use the [Volume] knob to adjust the volume.
Turn the knob to the right to raise the volume. Turn the knob to the left to lower the volume.
<fig.00-07.eps>
1.
Connect headphones to the headphones jack.
When headphones are connected, the speakers do not produce sound. Sound only
comes through the headphones. Adjust the headphone volume using the volume knob on
the MT-90U.
Use stereo headphones for the best sound.
Some notes on using headphones
• Make sure you handle the headphones, headphone cord, and jack appropriately to avoid
cord damage.
• When you connect your headphones, they can be damaged if the volume is set too high on
the device. Be sure to connect your headphones after turning the volume all the way down.
• Too much input into the headphones not only causes sound distortion and pain in your ears,
but also puts extra stress on the headphones. Be sure to use your headphones at an
appropriate volume.
Adjusting the Volume
Connecting Headphones
Low High
Front Panel
MT-90U_r_e1.book 14 ページ ２００８年３月２４日 月曜日 午後４時４６分