Filter
Top Products
40
MT-90U Basic Operation
3.
Press button [1].
The part displays a [
●
] above the track number, which signifies that only this part is set
to play.
<Fig17.eps>
If you want to change the solo part after pressing button [1], press buttons [3] or [4] to
change parts and the solo setting moves as well.
4.
Press the [
(Play)] button to begin playing the song.
Only the selected part begins to play.
5.
To cancel solo play, press button [1] again.
All parts begin to play.
Here’s how to specify which parts to play and which parts to mute.
Solo and mute settings are cancelled when you leave the 16 track screen.
1.
Press button [2] while pressing the [ (Song)] button.
The 16 track screen appears.
<Fig16.eps>
2.
Press buttons [3] or [4] to move to the part that you want to play.
3.
Press button [2] to set parts to [
●
] (play) or [
❍
] (mute).
Pressing button [2] switches the screen between play [
●
] and mute [
❍
].
You can also press the [-] button to mute the part [
❍
], or press the [+] button to play the
part [
●
].
<Fig18.eps>
4.
Press the [
(Play)] button and the specified parts of the song play.
Muted parts [
❍
] do not play. These are the parts that you can play to gain practice.
Turning Off Specific Parts (Mute)
NOTE
MT-90U_r_e1.book 40 ページ ２００８年３月２４日 月曜日 午後４時４６分