Filter
Top Products
29
MT-90U Basic Operation
The MT-90U can play a count sound before a song begins. This is called a “Count In.”
You can also hear a count during the lead-in to a song, before the melody begins. This
feature is called the “Intro Countdown.” When you want your playing to match the song,
counting in to the song with this feature makes it easier for you to get your timing right.
This feature is not available for audio files.
You can set the MT-90U to play only the Count In or only the Intro Countdown. For
details, see “Changing Count Settings” (p. 48).
Intro Countdown can only be heard on songs with a lead-in.
Intro Countdown begins once the melody is detected. If you cannot hear the Intro
Countdown well, try specifying a different melody track (or part). For details, see
“Changing Count Settings” (p. 48).
<fig.01-18.eps>
1.
Press the [
(Count In)] button.
The count indicator is lit.
2.
Press the [
(Play)] button.
The song begins after two measures are counted in. The count sound counts through the
song’s lead-in until the melody begins.
3.
To turn off the count sound, press the [
(Count In)] button.
The count indicator goes out.
You can change the number of measures to count in and the type of sound used. For
details, see “Changing Count Settings” (p. 48).
The metronome volume setting (p. 27) also applies to count volume setting.
Counting in to a Song
NOTE
NOTE
1, 3
2
MT-90U_r_e1.book 29 ページ ２００８年３月２４日 月曜日 午後４時４６分