Filter
Top Products
18
MT-90U Basic Operation
1.
Press button [1] while pressing the [ (Song)] button.
The tuning screen appears, as shown below.
<Fig6.eps>
2.
Press the [
(Bwd)] or [ (Fwd)] button to select the item to be set.
The item’s name appears on the left side of the lower line on the display.
3.
Press the [+] or [-] button to change the setting’s value.
Pressing both buttons at the same time returns the setting to its original value.
4.
Press the [
(Play)] button to start playing the tuning pitch.
If a song is playing, press the [
(Stop)] button to stop the song, and then press the
[
(Play)] button to start playing the tuning pitch.
Play the same note on your instrument and match its pitch to the MT-90U’s pitch.
5.
Press the [
(Stop)] button to stop playing the tuning pitch.
The tuning pitch stops.
6.
When you have finished tuning, press the [
(Song)] button.
The basic screen appears.
These settings will remain stored even while the power is turned off. To return to the
default settings, see “Returning to the Factory Default Settings (Factory Reset)” (p. 53).
Setting
Description Value
Tune
Select the standard pitch
415.3 Hz – 466.2 Hz
Pitch is set to 440.0 Hz when you turn
the power on.
Key
Select the note to use for tuning
A3 – A5
Note is set to A4 when you turn the
power on.
Sound
Select the tuning sound
Sine, Oboe
Shortcut: changing the tuning pitch
1. Press the [+] or [-] button while pressing the [ (Song)] button.
The tuning screen appears.
The tuning screen appears as long as the [ (Song)] button is pressed.
Press the [-] button to lower the pitch. Press the [+] button to raise the pitch.
Release the [ (Song)] button and the basic screen reappears.
MT-90U_r_e1.book 18 ページ ２００８年３月２４日 月曜日 午後４時４６分