Filter
Top Products
114
Troubleshooting
Depending on the virtual memory setting or network-related settings, noise may occur.
Please make the following settings before use.
• In Chooser of the Apple menu, set AppleTalk to “Inactive.”(This setting is not changed
as a result of turning off AppleTalk, as requested by OMS when sequencer software is
started up. You must change the setting yourself using the “Chooser.”)
• In the “Memory” Control Panel, set Virtual Memory to “Off.”
• Depending on the way in which you connect to the Internet, use the PCR-1 with the
following settings.
-
If you connect to the Internet via a LAN cable
Use while the LAN cable is connected.
-
If you connect to the Internet via the internal modem port, or are not connected to the
Internet
In the
“TCP/IP” Control Panel
, set
“Connect via”
to
“PPP.”
After you have made the settings, restart your Macintosh.
* Do not use software that accesses the network (such as a Web browser) at the same time that you are using
sequencer software or audio editing software.
fig.ASIO-04
Try increasing the Buffer Size in the ASIO Driver
control panel.
The name of the settings dialog box will differ
depending on your software.
* If you change the
buffer size
, you must exit the software and then restart it.
* Roland can make no guarantee of, nor provide support regarding the operation of sequencer software and
audio editing software made by another manufacturer. Please contact the manufacturer of the software you
are using.
PCR-1_e1.book 114 ページ ２００３年１１月２０日 木曜日 午後３時２２分